This is my original Italian Macaron recipe with an adjustable Smart Calculator! Now you adjust the measurements to work just for you! Where it says “servings – 48” there is a little up and down arrow that you can adjust per your egg weight or needs! Super easy and helpful 🙂
Below the recipe you will find a video for the macaronage process as well as a full length tutorial on how to make these amazing treats!
Italian Macarons with Smart Calculator
Prepare your baking sheets. I use silpat mats because that's what works best for me, but you can use parchment paper instead.
Weigh your water and granulated sugar into a small sauce pot and place on stove with a candy thermometer attached but don't turn the heat on just yet. You also do not want to stir it. Just measure it into the pot and set it on the stove. At no point will you be stirring the sugar water mixture.
Weigh your almond flour and powdered sugar into a bowl and place into a food processor. Pulse 2-3 times, stir to mix it around, and then pulse 2 more times.
**Sidenote** I use Anthony's Almond Flour straight out of the bag. It's an amazing brand that hasn't ever let me down and saves me some time from not needing to do anything to it beforehand.
Weigh 50 grams of egg whites into the bowl of a stand mixer and set aside.
Weigh the other 50 grams of egg whites into a separate large bowl. Add your almond flour and powdered sugar mixture. If you're adding food coloring or flavoring, you can add it now.
Turn the burner with your sugar water pot on to medium heat. Again, no stirring. Everything will be fine. Just let it work it's magic.
With a rubber spatula, start folding the egg whites into the sugar flour mixture.
To achieve the red I did I used 2 drops Americolor Crimson, 2 drops Hobby Lobby Brand Red Red, and 2 drops Hobby Lobby brand Super Red.
It will seem dry and like it's not going to mix, but eventually it will.
All mixed up. Set aside. You can cover with a lid or plastic wrap if your environment is very dry.
Your sugar water mixture should be simmering at this point. Once it reaches 100 degrees C, turn your stand mixer with the bowl of egg whites on to medium high.
This is where you have to multi-task. Watch your egg whites and your sugar water closely. You only want the egg whites to get foamy. Do not take them to soft peaks. Your sugar water is only going to get to 115 degrees C. If your egg whites are ready before your sugar, just turn the mixer down to low.
Once your sugar water reaches 115 degrees C, remove the candy thermometer and with the mixer on medium low, slowly pour the sugar water into the egg whites.
As soon as all of the sugar water is added, turn the mixer on medium to medium-high (as low as 6 and as high as 8 on a KitchenAid stand mixer).
I don't have an approximate time on how long to mix. What works best for me is bowl temperature. Every minute (or less) I place my hand on the lower portion of the outside of the bowl. Once it's at room temperature, my egg whites are usually ready. Even here you don't want stiff peaks. When you take the whisk out of the bowl, the egg whites will form a bird beak. They won't be stiff. They will be glossy.
Remove the plastic wrap from your flour sugar mixture and place half of the egg whites into the bowl. Fold this until you don't see anymore white streaks (from the egg) or dark clumps (from the flour mixture).
Add the second half of egg whites to the bowl. Fold the mixture while also pressing it against the side of the bowl periodically. You want the consistency to be like lava. No, I've never actually seen lava, but this is the most accurate description. It will still be somewhat thick, but will also slightly flow off of the spatula. This batter works best when it's not as thinned out as most other recipes. It will fall from the spatula but should not be able to do a "figure 8" into the bowl. You can watch the video below for more detail.
Place a piping tip into a piping bag, twist the end with the tip (keeps the batter from oozing out), and place into a cup. Scoop or pour the batter into the piping bag.
Pipe 1- 1 1/2 inch circles onto your prepared baking sheets about an inch apart. After your baking sheet is full of shells, bang it down on the counter 2-3 times, spin the pan around, and bang it down 2-3 more times. If there are still air bubbles you can pop them with a toothpick or scribe.
Turn your oven on to 300 degrees F. Your shells will be drying while your oven preheats. I highly recommend using an extra oven thermometer in your oven to make sure the temp is accurate.
Depending on your climate and humidity, the drying time will vary. I let mine dry for roughly 20-30 minutes. I test them by lightly touching the side of a shell. If the batter doesn't stick to your finger, it's ready to be baked! They will still have a shine on them.
Place into the oven for 7 minutes, rotate the pans around and cook for another 7 minutes. If you touch the side of a shell and it doesn't wiggle, it's ready.
**Sidenote** You may or may not be able to get away with not rotating your pans. This will vary from oven to oven.
Remove from the oven and let cool completely before attempting to remove from the silpat or parchment paper. The shells should pop off of the silpat easily. Every once in a while I have a few that slightly stick, but not usually. You can bend the silpat away from the cookie and this helps a lot.
Match up your cookies by size and fill! I mostly fill mine with flavored buttercreams, but there is an endless list of possibilities when it comes to flavored fillings!
Enjoy your gorgeous creations!
If you want to flavor these it's super simple! Sub out 10-20 grams of the powdered sugar for 10-20 grams of things like cocoa powder, ground down cereals, cookies, and freeze dried fruits! Let your imagination run free on this part and you can come up with some amazing flavors 🙂